The 2000.35.013/.022 is a DC and AC transformer, galvanically isolated from the measuring circuit. The device is in function and appearance quite similar to a standard active CT, but capable of measuring the direct and alternating TRMS component.The transformer is loop-powered with 4-20mA current and therefore does not require a direct power supply. It is the first loop-powered Hall-effect transformer with 0.5 % accuracy on the market.
On the version with RS485 Modbus serial output (2000.35.014/.033) and 0-10V analogue output, it is possible to freely configure the span, zero and assign the Modbus address; it is easy to configure it using the appropriate library on the Pixsys HMi Development Tools.
- DimensionsVersion 50A: 46,1 x 63 x 26,4 mm (terminal block excluded). Version 300A: 89,1 x 99,25 x 26,4 mm (terminal block excluded)
- MaterialGray PBT, epoxy resin filling
- WeightVersion 50A: Approx. 72 gr Version 300A: Approx. 370 gr
- SealingBox and terminal blocks: IP20
- Operating conditionsTemperature -40+85 °C, humidity 10..90 uR%
- CertificationsCE
ORDERING CODES | 2000.35.013 | 2000.35.022 | 2000.35.014 | 2000.35.033 |
---|---|---|---|---|
Power supply | Loop powered, 11 .. 30V DC | 12..30 V DC | ||
Consumption | max 20 mA | max 20 mA | ||
Measure type | TRMS | TRMS | ||
Accuracy | 0,5% F.S. - Resolution 12 bit | 0,5% F.S. - Resolution 12 bit | ||
Capacity | 50 Arms or 25 Arms selectable by Dip-Switch, bipolar (+/-50A dc or +/-25A dc) | 300 Arms or 125 Arms selectable by dip-switch, bipolar (+/- 300A DC o +/-150A DC) | 50 Arms or 25 Arms selectable by | 300 Arms or 125 Arms selectable by |
Passband | DC or 20..2000 Hz | |||
Response speed | 1000 ms | |||
Isolation | 3 kV on bare cable | |||
Analogue output | 4..20 mA | 0..10 V DC | ||
Serial communication | - | RS485 (1200..115200 Baud) |